Logolas G10 OPSL
|Source | Type:||Coherent OPSL module | single-colour [GREEN] laser projector|
|Suitability:||laser graphics - up to 1km projection distance|
|System control:||FB4 [Ethernet, ArtNet | PC, Lighting Console or Autoplay]|
|Compliant with:||EN 60825-1 [tested by TÜV SÜD], FDA|
|Size [WxHxD, mm]:||338 x 279 x 602|
|Guaranteed opt. output [mW]:||10000|
|R | G | B [mW]:||- | 10000 | -|
|Wavelengths [nm, ±5nm]:||- | 532 OPSL | -|
|Beam size [mm]:||4|
|Beam divergence [mrad]:||0.68 [full angle, averaged value, *see note B below]|
|Modulation [kHz] | type:||100 | analogue|
|X-Y scanners:||CT-6215 | 30kpps @ 8° [see Option below]|
|Power requirements [V] | Input:||100-230/50-60Hz | Neutrik powerCON TRUE1|
|Max. power consumption [VA]:||600|
|Operation temperature [°C]:||0-40|
|Included in the set:||
1.5M power lead, 10M Ethernet rj45 signal cable, E-STOP remote with 10M 3-pin XLR cable, set of 4 safety keys, interlock connector [for the USA only], USB memory stick with the user manual. Pangolin QuickShow laser control and creation software is available for FREE download.
All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed remotely via the built-in FB4 control interface. Scanning system overload protection.
|Laser safety features:||
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.
|note B||The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.
Logolas G10 OPSL is a very powerful, green laser display projector for outdoor laser advertising, with a huge projection reach of up to 1km. Get your message out there! Neon-like laser text and graphics will catch people’s attention and get you noticed.
With Logolas you can turn virtually any flat surface into a billboard that after dusk will outshine any other type of advertising and whose content can be changed as often as required.
The laser system is enclosed in a waterproof casing and controlled by a specially tuned version of the inbuilt FB4 control interface that holds all necessary animations loaded onto the SD card.
The content can be uploaded to the laser via ethernet cable. Pangolin QuickShow 4.0 laser control and creation software is included.
The Cambridge Technology CT6215 scanning system utilised in Logolas G10 OPSL delivers solid 30 Kpps scanning which is fast enough for any basic laser graphics, text or animations.
The optional Saturn5 | 50 Kpps Scanning offers even better performance for those who wish for the best possible scanning option with this system.
Every KVANT laser system is delivered with a Quality Control Certificate. The certificate includes the power output measurement of each laser wavelength within the system.