Here are some very useful tips which can help you to make your laser show safer.
How important is laser safety?
Maintaining laser safety should be the most important aspect of any laser show presentation. Lasers can create very impressive effects but it is important that those effects remain safe throughout the presentation.
If you fail due to an aspect of your laser show production, the only thing affected is your credibility and maybe your wallet.
If you fail in laser safety, the consequence can be more serious with the potential of causing somebody a permanent eye injury.
Why are lasers dangerous?
The laser light is coherent meaning that all the energy travels in the same direction and phase; unlike sunlight or light from a light bulb.
This enables laser light to remain concentrated over long distances, which is what makes it look so impressive for lighting e ects, but if used without care, laser light can present an exposure risk for direct viewing.
In such instances the human eye has the ability to focus this light onto a super-tiny spot on the retina, meaning even just few mW of visible laser light could cause permanent eye injury.
Legal obligations of laser users in Europe
Laser equipment in Europe must conform to the laser product safety standard EN 60825, meaning it must be supplied with specific safety features.
Kvant works hard to ensure our laser projectors meet this standard.
Anyone using lasers and exposing others to laser radiation is legally responsible for their actions.
Current European law prohibits exposing others to excessive laser radiation, where excessive means ‘over the Maximum Permissible Exposure (MPE) limits’.
Basic laser safety terms
Audience Scanning is when laser light or its refections are directed towards the heads of the audience. An extensive amount of knowledge and experience, together with the right testing equipment is necessary to correctly assess laser safety in order to perform audience scanning safely.
Maximum Permissible Exposure (MPE) is the maximum amount of visible laser radiation considered not to cause harm, for a given exposure time.
In many European countries these exposure limits may also be a legal requirement.
The MPE is 25.4W/m2 for a period of 250 milliseconds, which is the equivalent to 1mW over a 7mm circular aperture (the size of the human pupil).
For shorter exposure durations, such as when the beam is scanning fast, and has a suitable scan-fail detector, it is possible to apply higher limits.
Exposure levels above 25.4W/m2 are higher risk, so must be used with care and proper understanding of what is still acceptable.
Nominal Ocular Hazard Distance (NOHD) is the distance between you and a laser projector that is considered to be safe if you are hit by a single beam at full power for a period of less than 250ms. Just as an example, the lowest power system that we manufacture is called the Clubmax 800 which outputs 800mW of laser power.
The NOHD even of this small system is for a stationary beam 273m. Yes, 273 metres!
Where to place a laser?
There are established rules about how and where to position any laser system.
The most important is to place the system so that the vertical separation distance between any over-the-MPE e ect and highest point of audience access is no less than 3m.
The horizontal separation distance should be no less than 2.5m from any publicly accessible area if the effects are over the MPE.
The laser system must be attached securely in position so no accidental movement is possible.
We all know how dangerous laser pointers are when pointed at aircraft.
If the authorities catch you aiming any laser at an aircraft you will most likely go to jail, regardless of whether it was only a laser pointer or a big laser system.
Laser pointers are very dangerous in the hands of those who play with them in public thinking it’s fun. Many of these pointers produce more than enough power to cause dazzle or permanent eye injury to anyone who is quite a long distance away.
Never look into the light of any laser pointer!
Laser display safety records
For every event where lasers are used you should prepare a document that covers Laser Safety for that particular installation and/or show production.
This document should be submitted to the venue owner/manager and the local Laser Safety Offcer (LSO) who should sign it off.
This should demonstrate that everything was done in accordance with the very latest legislation and that what you are planning to do is safe for your audience.
It would also help you if someone ever falsely accused you of causing laser-related damage to people or to property.
SafetyScan lenses from Pangolin are compatible with all KVANT laser systems.
They increase the divergence of laser beams and thus reduce the power density of the light helping to make audience scanning safer.
Using these lenses does not necessarily mean the show is safe, so make sure you fully understand how they work.
How can You help to make your laser show safer?
- Understand the problems - go to safety training, search online and learn from others who are competent enough.
- Don’t scan the audience unless you are 100% certain that what you are doing is 100% safe.
- Position the lasers according to basic rules and don’t compromise on safety for any reason.
- Use physical masking to limit the laser output to areas where the laser beams are not supposed to go.
- Use only laser projectors from well known and respectable manufacturers.
- Use only projectors that are legal to use in the region where you use them.
- Always check for and deal with any re ective surfaces that could direct the beams in any unwanted direction.
- Do your homework and always prepare your Laser Display Safety Record and have it signed off.
- Read this text at least 3 times and download it here for future reference.
Laser safety training: Yes or No?
Go for laser safety training provided by an expert in your area. It is money well spent and if the training is as good as the one run by LVR Optical
in the UK, you will understand all the important basics in no time.